Building house license plan section set typical

Preliminary house plan sets include only the floorplan, elevations, and roof layout sheets as noted above along with a single-use license.

These plans are useful in several instances:. The cost of the preliminary plan set can be credited toward the purchase of a standard plan set for the same house plan within six months from the date of purchase. Site Plans and Surveys Property surveys and site plans showing terrain details and the location of the house on the property are not included in a typical set of stock plans.

If your builder is unable to assist with a site plan, 61custom can provide an estimate — fees are quoted on an individual basis. Site boundary and terrain surveys can be obtained from a local surveyor. Plumbing fixtures, air handlers and compressor locations are shown on the plans.

In most cases, your builder or sub-contractor can provide this information if required for permit. Site plans show the location of the home on your lot along with utility connection points, well and septic locations, roads or easements, and general information about the property. Contact us for an estimate. Additional Licenses A single-use license is included with the purchase of any house plan set.

Standard plan set and preliminary plan set licenses allow for one home to be built per license, or one derivative design to be built one time per license.

The index lists the order of the drawings included, with page numbers for easy reference. The site plan is a scaled footprint of the house to help determine how the home will be placed on the building site.

This section shows section cuts of the exterior wall from the roof down through the foundation. They also show the number of stories, type of foundation and the construction of the walls.

Roofing materials, insulation, floor framing, wall finishes and elevation heights are all shown and referenced. This section addresses all the facets and typical details you will want to include in your home, with the exception of local building code requirements. Architectural and structural elements are detailed, including: window and door components, railings, balusters, wood stairs and headers, interior walls, interior partitions, concrete steps and footings if applicable.

This sheet provides a fully dimensioned and noted foundation layout, including references to footings, pads, and support walls. For plans with a basement, additional walls and columns may be shown. Basement plans come with a floor framing layout which may be included in this section or the floor framing section, depending on the plan.

Actual structural information should be obtained by a locally licensed engineer for your specific site location. This section provides detailed floor plan drawings and descriptions of all the elements that will be included on each floor of the home. Important features are noted including built-ins, niches and appliances.

All doors and windows are identified. Typically this section also includes the square footage information. This section shows ceiling heights and treatments. It also shows the details, profiles and finishes of the ceiling treatments. Arches and soffits are also specified in this section. Homes with a basement or crawl space will have a floor framing plan for the first floor.

Subscribe to our Newsletter. Stay informed - subscribe to our newsletter. Email The subscriber's email address. Search AboutCivil. Similar Articles.

Electrification Drawings Required in Building. Architectural Drawings Required for Building Construction.